Linde HT25Ts, HT30Ts LPG Forklift Truck H1283 Series Operating Instructions (User Manual)

Original Illustrated Factory Operating Instructions (User Manual) for Linde LPG Forklift Truck Type 1283, Models HT25Ts, HT30Ts.

Original factory manuals for Linde Forklift Trucks, contains high quality images, diagrams and instructions to help you to operate, maintenance and repair your truck

Covered models:
   HT25Ts
   HT30Ts

Format: PDF, 139 Pages, Printable
Language: English

Contents:
   1. Introduction
    Your forklift truck
    Description of use and climatic conditions
    Proper use
    Symbols used
    Technical description
    Receivingthe industrial truck
    Truck takeover
   2. Safety
    Safety guidelines
    Residual risks
    Stability
    In the case of tip-over
    Handling consumables
    Competent person
    Regulations
    Instructions for fitting attachments
    Lowering the forks manually
    Emergencyexitfortruckswithrearwind-screen
    Safety instructions for the LPG system
   3. Overview
    Identification plates
    Truck overview
    Controls
    Display unit
    Switch panel
   4. Operation
    Checks and services before initial operation*
    Running-in instructions
    Daily checks before use
    Seat belt conditions and performance check
    Climbing on/off the forklift
    Adjusting the steering column
    Operating the horn
    Visual,olfactory inspection of LPG system
    Change the LP-gas bottle
    Fillthe LPG tank*
    Opening the gas cylinder or LPG tank* shutoff valve
    Drive engine
    Closing the gas cylinder or LPG tank* shutoff valve
    Driving
    Steering system
    Brake system
    Inching/Braking system adjusting
    Lifting system and attachments
    Working under load
    Transporting
    Forklift towing
    Before leaving the lift truck unattended
    Leaving the truck
   5. Maintenance
    General Information
    Supply Table
    Inspection as required
    500 h service plan
    1 000 h sen/ice plan
    3000 h service plan
    Engine
    Change the engine oil
    Change the engine oil filter
    Check the LPG system for damage and leaks with leakage spray
    Check the basic adjustment of the LPG system
    Change the fan drivebelt
    Re-tensioning the drivebelt
    Intake/exhaust valve clearance adjustment
    Clean the LPG filter
    Check the air intake and exhaust pipes for leaks
    Clean air cleaner element
    Adjust the ignition timing
    Change the spark plugs
    Check the engine mounting for condition and tightness
    Change the air filter element,check the vacuum switch (every 6 months minimum or after 5 cleanings)
    Clean the evaporator / pressure regulator
    Check the LPG mixer adjustment
    Change the LPG filter
    Change the spark plugs
    Change the high-pressure gas hoses
    Cooling system
    Clean radiator
    Change the coolant
    Transmission
    Check the transmission oil level
    Change transmission oil filter
    Change transmission oil
    Change axle oil
    Steering axle and wheels
    Clean and grease the steering axle
    Tighten wheel fastenings
    Check the tyres for damage and foreign objects
    Check tyre inflation pressure
    Chassis frame
    Check seat belt for condition and operation
    Check mounting of engine, overhead guard, steering axle and wheel drive for tightness
    Brake system
    Check the parking brake for correct operation
    Check and adjust service brake
    Check brake system fluid level
    Change brake system liquid
    Greased the automatic adjuster bolt threads and sliding bushes with heat resistance grease
    Electrics
    Check the condition and secure positioning of electric cables,cable connectors and connections
    Check battery condition, electrolyte level and specific gravity
    Check the fuses
    Hydraulics
    Check the hydraulic system,drive axle and cable for leaks (visual inspection)
    Check hydraulic tank oil level
    Change the hydraulic oil press filter
    Change the hydraulic oil suction filter
    Change the hydraulic oil breather filter
    Check the pretension of double hoses if attachments are fitted
    Change hydraulic system oil
    Load lift system
    Check the forks and fork quick-releases
    Check the mast,lift chains and stops for condition,mounting and operation
    Lubricate the tilt and side shift mechanisms
    Lift mast and lift chaindubricate with chain spray
    Grease the mast and tilt cylinder pivots
    Adjust the lift chain length* and lubricate the lift chain with chain spray
   6. Technical data
    Type sheet HT 25 Ts, as at 04/2012

   Annex

   7. Circuit diagrams
    Wiring diagram
    Circuit diagrams without ISO 3691
    Circuit diagrams with ISO 3691
    Circuit diagrams with ISO 3691
    Traction, working and steering hydraulics