Linde Pallet Truck Type 365: L14, L14AP, L16, L16AP Operating and Maintenance Instructions

Original Illustrated Factory Operating and Maintenance Instructions for Linde Pallet Truck Type 365.

Original factory manuals for Linde Forklift Trucks, contains high quality images, diagrams and instructions to help you to operate, maintenance and repair your truck

Covered models:
   L14
   L14AP
   L16
   L16AP

Format: PDF, 132 Pages
Language: Francais, English, Deutsch

Contents:
   Description
    Type plates L 14, L 16
    Type plates L 14 AP, L 16 AP
    Technical data
    Technical description
    Chassis and wheels
    Drive
    Steering
    Hydraulic system
    Driver`s platform model L 14 AP, L 16 AP .
    Brakes
    Built-in charger (optional)
    General view L 14, L 16
    General view L 14 AP, L 16 AP
    Controls and indicators L 14, L 16
    Controls and indicators L 14 AP, L 16 AP .
    Indicators
    Combined hour meter and battery discharge indicator/limiter
    Hour meter
    Battery discharge limiter
   Beginning operation
    Safety rules
    Important safety information
    Accident prevention check
    Running-in instructions
    Checks prior to initial operation
    Daily checks
    Daily pre-operational checks and servicing ..
    Open the front cover (L 14, L 16)
    Open the side covers (L 14 AP, L 16 AP) .
    Open the centre cover (L 14 AP, L 16 AP).
    Check the wheel mounting
    Check the hydraulic oil level
    Check the gearbox oil level
    Check the battery state of charge
    Open the battery cover (L 14, L 16)
    Open the battery cover (L 14 AP, L 16 AP).
    Charging the battery
    Connecting the battery to an external charger.
    Charging the battery with the built-in charger .
    Check the condition, electrolyte level and specific gravity of the battery acid
    Battery replacement
    Battery removal with a crane (L 14, L 16) .
    Battery removal with a crane (L 14 AP, L 16 AP). .
    Check the brake
    Check the safety reverse switch
    Check the emergency stop button for operation . .
    Check the dead man`s pedal (L 14 AP, L 16 AP) . .
   Operation
    Driving, beginning operation
    Emergency stop button
    Setting the tiller to the driving position
    Steering
    Driving (L 14, L 16)
    Travel in the forward direction (L 14, L 16).
    Travel in the reverse direction (L 14, L 16).
    Reversing the direction of travel (L 14, L 16). . . .
    Speed limitation (L 16)
    Driving (L 14 AP, L 16 AP)
    Driving in pedestrian mode (L1 4 AP, L 16 AP). . .
    Swinging up the driver`s platform, swinging in the guards (L 14 AP, L 16 AP). ...
    Travel in the forward direction (L 14 AP, L 16 AP)
    Travel in the reverse direction (L 14 AP, L 16 AP)
    Reversing the direction of travel (L 14 AP, L 16 AP)
    Speed limitation (L1 6 AP)
    Driving (L 1 4 AP, L 16 AP)
    Driving in rider mode (L 14 AP, L 16 AP) .
    Lowering the driver`s platform, (L 14 AP, L 16 AP)
    Travel in forward direction (L 14 AP, L 16 AP) . .
    Travel in reverse direction (L 14 AP, L 16 AP) . .
    Reversing the direction of travel (L 1 4 AP, L 1 6 AP
    Speed limitation (L 16 AP)
    Brakes
    Mechanical brake
    Opposite-current braking
    Parking brake
    Operating the lift mast
    Lifting the forks
    Lowering the forks
    Selecting initial lift
    Raising the wheel legs
    Lowering the wheel legs
    Safety features for trucks with initial lift
    Operation of attachments
    Operating the horn
    Fuses
    Battery charger fuses
    Loading
    Before loading
    Loading
    Transporting the load
    Unloading
    Before leaving the truck
    Towing instructions
    Liftingthe truck by crane
   Maintenance
    General information
    Work on the LINDE mast and on the rear part of the truck
    Lift mast removal
    Standard mast
    Securing the raised standard mast
    Duplex mast
    Securing the raised duplex mast
    Inspections and maintenance after the first 50 service hours
    Inspection and maintenance schedule
   Inspection and maintenance as required
    Clean the truck
    Clean and spray the mast chain
    Check the wheel mounting
    Checking the wheels for condition
    Check the built-in charger
    Inspection and maintenance every 3 months or every 250 hours
    Check the braking system
    Check the etectromagnetic brake
    Check the gearbox oil level
    Check the hydraulic oil level
    Check the hydraulic system for leaks
    Lubricate the bogie of the drive unit
    Electrical system, check cables and electrical connections for condition and secureness ...
    Lubricate the initial lift cylinder pivots
    Lubricate the mounting of the driver`s platform (L 14 AP, L 16 AP)
    Check and spray other pivots and joints .
   Inspection and maintenance every 6 months or every 500 hours
    Clean the SCR control with compressed air
    Check the contactors, replace contacts if required
    Clean the electric motors
    Check the motor carbon brushes, renew if required
    Check the nuts and bolts on frame, chassis, and fork for secureness
    Check mast and the mast chain for condition and mounting
    Check the mast chain length, adjust if required
    Spray with chain spray
   Inspection and maintenance every year every 1000 hours
    Clean the hydraulic oil filter
   Inspection and maintenance every 2 years or every 2000 hours
    Change the hydraulic oil
    Change the gearbox oil
    Inspection and maintenance data
    Recommended lubricants and fluids
    Hydraulic schematic
    Wiring diagram L14 without initial lift
    Wiring diagram L14 with initial lift
    Wiring diagram L14 AP without initial lift
    Wiring diagram L14 AP with initial lift
    Wiring diagram L16 without initial lift
    Wiring diagram L16 with initial lift
    Wiring diagram L16AP without initial lift
    Wiring diagram L16AP with initial lift
   Index